|
Trend |
TREND 10/11X1/2TC CHAMFER V GROOVE A=45¡ X 38MM DIA |
Product Code: 10/11X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=40 mm
C=19 mm
C2=26.5 mm
A=45 degrees
OL=71 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 40
Cut...
|
TREND 104/35X1/4TC HINGE SINKING 35MM DIA |
Product Code: 104/35X1/4TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.
Use with pillar drills only.
Dimensions:
D=35 mm
OL=65 mm
Shank Diameter=1/4 inc...
|
TREND 104/35X3/8TC HINGE SINKING 35MM DIA |
Product Code: 104/35X3/8TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.
Use with pillar drills only.
Dimensions:
D=35 mm
OL=65 mm
Shank Diameter=3/8 inc...
|
TREND 105/35X1/2TC ROUTER MACHINE BIT 35MM DIA HINGE |
Product Code: 105/35X1/2TC These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used.
Dimens...
|
TREND 10H/1X1/4TC PIN GUIDED CHAM/BEVEL A=45¡ 253348 |
Product Code: 10H/1X1/4TC Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material.
Dimensions:
C=10 mm
C2=14 mm
P=5.5 mm
A=45 degrees
OL=53.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 25
Cut Length M...
|
TREND 11/30X1/4TC CHAMFER V GROOVE A=45¡ X 25.4MM |
Product Code: 11/30X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=27.5 mm
C=13 mm
C2=18.38 mm
A=45 degrees
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1
...
|
TREND 11/3X1/4TC CHAMFER V GROOVE 8MM 253349 |
Product Code: 11/3X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Is ideal for imitating 'V' jointed tongue and groove on man-made board.
Dimensions:
D=3/4 inch
D=19.4 mm
C=9.2 mm
C2=13 mm
OL=56 mm...
|
TREND 11/50X1/4TC PANEL MOULD 4.0 RADX13MM DIA 257109 |
Product Code: 11/50X1/4TC Ideal for edge of drawer fronts and cabinet doors.
Dimensions:
D=13 mm
D2=1.2 mm
C=12 mm
R=4 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 13
Diameter 2 Metric: 1.2
Cut Length Metric: 12
Overall Length Metric: 52...
|
TREND 11/5X1/4TC CHAMFER 'V' GROOVE A=60¡ 257084 |
Product Code: 11/5X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=1/2 inch
D=12.7 mm
C=10.3 mm
C2=11.9 mm
A=60 degrees
OL=44.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diamete...
|
TREND 12/03X1/4TC RADIUS CUTTER 1.6MM RAD |
Product Code: 12/03X1/4TC For coves and part of a rule joint.
Dimensions:
D=1/8 inch
D=3.2 mm
C=9.5 mm
R=1/16 inch
R=1.6 mm
OL=45 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/8
Diameter Metric: 3.2
Cut Length Imperial: 3/8
Cut Length Metric: 9.5
...
|
TREND 12/05X1/4TC RADIUS CUTTER 2.4MM RAD X 11MM CUT |
Product Code: 12/05X1/4TC For coves and part of a rule joint.
Dimensions:
D=4.8 mm
C=7/16 inch
C=11 mm
R=3/32 inch
R=2.4 mm
OL=60 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 4.8
Cut Length Metric: 11
Overall Length Metric: 60...
|
TREND 12/3X1/4TC RADIUS CUTTER 3MM RAD 257090 |
Product Code: 12/3X1/4TC For coves and part of a rule joint.
Dimensions:
D=6 mm
C=15 mm
R=3 mm
OL=58.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 6
Cut Length Metric: 15
Overall Length Metric: 58.5...
|
TREND 12/4X1/4TC RADIUS CUTTER 4.0MM RAD X 12.7MM C |
Product Code: 12/4X1/4TC For coves and part of a rule joint.
Dimensions:
D=8 mm
C=1/2 inch
C=12.7 mm
R=4 mm
OL=56.7 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 8
Cut Length Imperial: 1/2
Cut Length Metric: 12.7
Overall Length Metric: 56.7...
|
TREND 12/5X1/4TC RADIUS 5MM RAD & 18MM CUT 253350 |
Product Code: 12/5X1/4TC For coves and part of a rule joint.
Dimensions:
D=10 mm
C=18 mm
R=5 mm
OL=58 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 10
Cut Length Metric: 18
Overall Length Metric: 58...
|
TREND 12/6X1/4TC RADIUS 6.3MM RAD X 19MM CUT 257091 |
Product Code: 12/6X1/4TC For coves and part of a rule joint.
Dimensions:
D=1/2 inch
D=12.7 mm
C=19 mm
OL=59 mm
R=1/4 inch
R=6.3 mm
OL=47 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cut Length Metric: 19
Overall Length Met...
|
TREND 12/7X1/4TC RADIUS 7MM RAD X 14MM DIA 253351 |
Product Code: 12/7X1/4TC For coves and part of a rule joint.
Dimensions:
D=14 mm
C=18 mm
R=7 mm
OL=46 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 14
Cut Length Metric: 18
Overall Length Metric: 46...
|
TREND 13/1X1/4TC RADIUS 8MM RAD & 16MM DIA 257092 |
Product Code: 13/1X1/4TC For coves and part of a rule joint.
Dimensions:
D=16 mm
C=19.5 mm
R=5/16 inch
R=8 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 16
Cut Length Metric: 19.5
Overall Length Metric: 51...
|
TREND 13/30X1/2TC COVE 12.7MM RAD X 25.4MM DIA |
Product Code: 13/30X1/2TC For coves and part of a rule joint.
Dimensions:
D=1 inch
D=25.4 mm
C=5/8 inch
C=15.9 mm
R=1/2 inch
R=12.7 mm
OL=56 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1
Diameter Metric: 25.4
Cut Length Metric: 15.9
Overall Length ...
|
TREND 13/3X1/4TC COVE 10MM RAD & 20MM DIA 257094 |
Product Code: 13/3X1/4TC For coves and part of a rule joint.
Dimensions:
D=20 mm
C=18 mm
R=10 mm
OL=46 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 20
Cut Length Metric: 18
Overall Length Metric: 46...
|
TREND 18/53X1/4TC B/GUIDED CLASSIC 3.2MM RAD 257111 |
Product Code: 18/53X1/4TC Ideal for following templates when panelling and profiling in furniture manufacture.
It is advisable that the template is at least 5mm thicker than the cut length of the cutter.
Dimensions:
D=22 mm
C=10 mm
B=22 mm
R=3.5 mm
OL=51 mm
Shank Diameter=...
|
TREND 2/01X1/4TC SINGLE FLUTE 1.5MM DIA X 6MM CUT |
Product Code: 2/01X1/4TC Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut ...
|
TREND 2/15X1/4TC SINGLE FLUTE 3MM DIA X 11MM CUT |
Product Code: 2/15X1/4TC Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Small diameter tools must be handled with care to avoid breakage.
Single flute...
|
TREND 2/6X1/4TC SINGLE FLUTE 6.3 DIA X 19MM 253332 |
Product Code: 2/6X1/4TC Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Small diameter tools must be handled with care to avoid breakage.
Single flute cutters should not be used in eccentric ch...
|
TREND 24/10X1/4TC PLUG MAKER 12MM PLUG 253352 |
Product Code: 24/10X1/4TC These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools.
Use at recommended speeds of 1000-20000 RPM.
Dimensions:
D=12 mm
C=16 mm
OL=55 mm
Shank Diameter=1/4 inch
Body=19 mm
Shank Diameter: 1/4
Diam...
|
TREND 3/01X1/4TC TWO FLUTE 4MM DIA X 11MM 257014 |
Product Code: 3/01X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/32 inch
D=4 mm
C=11 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
|
|