|
|
Trend |
| TREND 3/01X1/4TC TWO FLUTE 4MM DIA X 11MM 257014 |
Product Code: 3/01X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/32 inch
D=4 mm
C=11 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/04X1/4TC TWO FLUTE 2.5MM DIA X 8MM CUT |
Product Code: 3/04X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=2.5 mm
C=8 mm
OL=48 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 2.5
Cut L...
|
| TREND 3/05X1/4TC TWO FLUTE 3.0MM DIA X 11MM CUT |
Product Code: 3/05X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=3 mm
C=11 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 3
Cut Leng...
|
| TREND 3/06X1/4TC TWO FLUTE 2MM DIA X 5MM CUT |
Product Code: 3/06X1/4TC
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/64 inch
D=2 mm
C=5 mm
OL=43 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 5/64
Diameter Metric: 2
Cut Length Metric: 5
Overall Length Metric: 43...
|
| TREND 3/1X1/4TC TWO FLUTE 5MM DIA X 16MM 257016 |
Product Code: 3/1X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=13/64 inch
D=5 mm
C=16 mm
OL=69 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/22X1/2TC TWO FLUTE 6.3MM DIA X 25MM CUT |
Product Code: 3/22X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25 mm
OL=70 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperi...
|
| TREND 3/22X1/4TC TWO FLUTE 6.3MM DIA X 25MM 257021 |
Product Code: 3/22X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25 mm
OL=69 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/23X1/4TC TWO FLUTE 6.5MM DIA X 25MM CUT |
Product Code: 3/23X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=6.5 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 6.5
Cut ...
|
| TREND 3/2X1/4TC TWO FLUTE 6MM DIA X 16MM 253335 |
Product Code: 3/2X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=15/64 inch
D=6 mm
C=16 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/3X1/4TC TWO FLUTE 7MM DIA X 19MM 257023 |
Product Code: 3/3X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=9/32 inch
D=7 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/41X1/2TC TWO FLUTE 8MM DIA X 25MM CUT |
Product Code: 3/41X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=69 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperia...
|
| TREND 3/41X1/4TC TWO FLUTE 8MM DIA X 25MM CUT |
Product Code: 3/41X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/45X1/4TC TWO FLUTE 8.9MM DIA X 26MM CUT |
Product Code: 3/45X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=8.9 mm
C=25 mm
OL=70 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 8.9
Cut ...
|
| TREND 3/4X1/4TC TWO FLUTE 8MM DIA X 19MM 253333 |
Product Code: 3/4X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=19 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/50X1/2TC TWO FLUTE 9.5MM DIA X 25MM CUT |
Product Code: 3/50X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/8 inch
D=9.5 mm
C=25 mm
OL=71 mm
Shank Diameter=1/2 inch
Shank D...
|
| TREND 3/60X1/2TC TWO FLUTE 10MM DIA X 35MM 257044 |
Product Code: 3/60X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=35 mm
OL=81 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/61X1/2TC TWO FLUTE 10MM DIA X 25MM |
Product Code: 3/61X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=25 mm
OL=71 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/61X1/4TC TWO FLUTE 10MM DIA X 25MM |
Product Code: 3/61X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=25 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/71X1/2TC TWO FLUTE 12MM DIA X 25MM CUT |
Product Code: 3/71X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=25 mm
OL=68 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/72X1/2TC TWO FLUTE 12MM DIA X 38MM CUT |
Product Code: 3/72X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=38 mm
OL=80 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/73DX1/2TC TWO FLUTE 12MM DIA X 50MM CUT |
Product Code: 3/73DX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=50 mm
OL=109 mm
Shank Diameter=1/2 inch
Especi...
|
| TREND 3/73X1/2TC TWO FLUTE 12MM DIA X 50MM 257045 |
Product Code: 3/73X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=50 mm
OL=109 mm
Shank Diameter=1/2 inch
Shank...
|
| TREND 3/74X1/2TC TWO FLUTE 12MM DIA X 32MM CUT |
Product Code: 3/74X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/4 inch
C=32 mm
OL=73 mm
Shank Diameter=1/2...
|
| TREND 3/75X1/2TC TWO FLUTE 12MM DIA X 63MM CUT |
Product Code: 3/75X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=2 1/2 inch
C=63 mm
OL=114 mm
Shank Diameter=1/...
|
| TREND 3/76X1/4TC TWO FLUTE 12.55MM DIA X 25.MM CUT |
Product Code: 3/76X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=31/64 inch
D=12.55 mm
C=25.4 mm
OL=67 mm
Shank Diameter=1/4 inch
S...
|
| TREND 3/7X1/4TC TWO FLUTE 11MM DIA X 25MM 257030 |
Product Code: 3/7X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/16 inch
D=11 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank D...
|
|
|
Basket 0 items - £0.00
