|
|
Trend |
| TREND B22A BEARING 22MM DIA X 3/16 BORE |
Product Code: B22A Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B95B BEARING 3/8 DIA X 1/8 BORE |
Product Code: B95B Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND BSC/0/1000 BISCUIT NO 0 1000 OF |
Product Code: BSC/0/1000 Trend biscuits are made of die cut beech.
Beechwood biscuits which expand when in contact with a woodworking adhesive such as PVA glue.
They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board. ...
|
| TREND BSC/10/100 BISCUIT NO 10 100 OFF |
Product Code: BSC/10/100 Trend biscuits are made of die cut beech.
Used with PVA adhesives, the moisture in the glue expands the beech biscuits to form a solid bond that locks any joint tightly for maximum strength.
Made from high quality compressed beech in the popular No...
|
| TREND BSC/20/100 BISCUIT NO 20 100 OFF |
Product Code: BSC/20/100 Trend biscuits are made of die cut beech.
Allows easy construction across a multitude of applications using simple butt joints and slotted biscuit grooves for quickly constructed very strong joints on joinery, furniture and framing.
Used with PVA a...
|
| TREND BUSH/600 BUSH FOR COMBI600 ALLOY 20MM 1 OFF |
Product Code: BUSH/600 Replacement alloy location bush for use with the COMBI600 jig,
Dimensions:
Diameter= 20 mm
Overall length=37 mm
Pin length=9 mm
Pin diameter=10 mm
Min. jig thickness=10 mm
Suits jig=COMBI600, TT/KWJ600, TT/KWJ650, TT/KWJ900
Diameter Metric: 20
Ove...
|
| TREND BW12 BUSHING WASHER 30MMOD 25MMID |
Product Code: BW12 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bus...
|
| TREND BW20 BUSHING WASHER 11/4OD 30MMID |
Product Code: BW20 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bu...
|
| TREND BW24 BUSHING WASHER 30MMOD 15MMID |
Product Code: BW24 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bus...
|
| TREND BW25 BUSHING WASHER 30MMOD 18MMID |
Product Code: BW25 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bus...
|
| TREND BW29 BUSHING WASHER 32MMOD 30MMID |
Product Code: BW29 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bus...
|
| TREND BW30 BUSHING WASHER 32MMOD 25MMID |
Product Code: BW30 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bu...
|
| TREND BW4 BUSHING WASHER 25MM OD 20MMID |
Product Code: BW4 Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.
Extra care must be taken when mounting sawblades onto a saw spindle when using bus...
|
| TREND BW6 BUSHING WASHER 30MM OD 5/8ID |
Product Code: BW6 Trend 30 to 15.9mm Reducing Bush - for saw blades
1.4mm thick 30mm outside diameter reducing washer with 15.9mm internal bore.
Allows 30mm bore blades with 1.4mm thick plates to be fitted with compatible saws with 15.9mm spindle fittings.
Accurately...
|
| TREND C/CHISEL CORNER CHISEL HSS |
Product Code: C/CHISEL Allows a rounded recess in wood to be cut to a square recess with the use of a hammer.
Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates.
Spring loaded high speed steel (HSS) anvil for a sharp cut and lon...
|
| TREND C001CX1/4TC TWO FLUTE 2.0MM DIA X 5MM CUT |
Product Code: C001CX1/4TC Trend Craft Pro 1/4in shank straight router cutter - 2mm diameter solid carbide insert
Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste.
2mm diameter X 5mm cutting depth with bottom cut...
|
| TREND C001X1/4TC TWO FLUTE 3.2MM DIA X 9.5MM CUT |
Product Code: C001X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=1/8 inch
D=3.2 mm
C=3/8 inch
C=9.5 mm
...
|
| TREND C002X1/4TC TWO FLUTE 4.0MM DIAX 11.1MM CUT |
Product Code: C002X1/4TC Trend Craft Pro 1/4in shank straight router cutter - 4mm diameter solid carbide insert
Two flute solid carbide insert for increased strength, offering cleaner cutting edges and fast clearance of waste.
4mm diameter X 11.1mm cutting depth with bottom ...
|
|
|
Basket 0 items - £0.00
