omical, water-borne matt finish for interior use. High moisture permeability allows application to new plaster, brickwork and render before the drying process is complete.
. PROPERTIES Drying time Under normal drying conditions touch dry 2 hours, recoatable after 4 hours.
Allow for adequate ventilation during the drying period.
Finish Matt. Composition Pigment: Titanium Dioxide, coloured pigments and extenders. Binder: Vinyl acetate copolymer. Solvent: Water.
Spreading rate Up to 16m² per litre depending on surface texture and porosity. Wet film thickness 63 micrometres at 16m² per litre. Dry film thickness 16 micrometres at 16m² per litre. Volume solids 26% Brilliant White other colours will vary.
Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
PREPARATION New surfaces All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery, polished plaster or dense surfaces should be primed with Macpherson Universal Primer. Porous surfaces should be ‘mist’ coated with Macpherson Eclipse thinned with up to 40% clean water.
COATING SYSTEM Apply two coats as required APPLICATION Stir well before use. Apply by brush or roller. For airless spray dilution may be required. For further information contact the Customer Relations Team. CLEANING Return surplus material to container. Wash with clean water immediately after use.
Basket 0 items - £0.00
