trend

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Dimensions: D=12.89 mm C=10.3 mm C2=11.9 mm A=60 degrees OL=56 mm Shank Diameter=1/4 inch Shank length=40 mm Shank Diameter: 1/4 Diameter Imperial: 1/2 Diameter Metric: 12.89...

For coves and part of a rule joint. Dimensions: D=8 mm C=1/2 inch C=12.7 mm R=4 mm OL=56.7 mm Shank Diameter=1/4 inch Shank length=40 mm Shank Diameter: 1/4 Diameter Metric: 8 Cut Length Imperial: 1/2 Cut Length Metric: 12.7 Overall Length Metric: 56.7

For coves and part of a rule joint. Dimensions: D=10 mm C=18 mm R=5 mm OL=58 mm Shank Diameter=1/4 inch Shank length=40 mm Shank Diameter: 1/4 Diameter Metric: 10 Cut Length Metric: 18 Overall Length Metric: 58

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Suitable for plunge cutting. Tungsten Carbide Tipped. Dimensions: D=5/32 inch D=4 mm C=11 mm OL=65 mm Shank Diameter=1/4 inch Shank Diameter: 1/4...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics, as well as softwoods. Two flutes give a clean finish to cut edges. Suitable for plunge cutting. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=68 mm Shank Diameter=1/4 inch Shank length=40 mm Shank Diameter: 1/4 Diameter Imperial: 1/4 Diameter...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=9/32 inch D=7 mm C=19 mm OL=61 mm Shank Diameter=1/4 inch Shank length=40 mm Shank Diameter: 1/4 Diameter Imperial: 9/32 Diameter...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/64 inch D=10 mm C=35 mm OL=81 mm Shank Diameter=1/2 inch Shank length=40 mm Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/64 inch D=10 mm C=25 mm OL=71 mm Shank Diameter=1/2 inch Shank length=40 mm Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=50 mm OL=109 mm Shank Diameter=1/2 inch Especially suited for drilling...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=1 1/4 inch C=32 mm OL=76 mm Shank Diameter=1/2 inch Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=2 1/2 inch C=63 mm OL=114 mm Shank Diameter=1/2 inch Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=76 mm Shank Diameter=1/2 inch Shank length=40 mm Shank...

TCT extra long cutter. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops Dimensions: D=1/2 inch D=12.7 mm C=50 mm OL=108 mm Shank Diameter=1/2 inch Material=Tungsten Carbide Tipped Shank length=52 mm Shank Diameter: 1/2 Diameter Imperial: 1/2 Diameter Metric:...

Replacement arbor for the C155X8MMTC. Dimensions: OL=87 mm Thread=UNF 5/16 Spigot dia.=8 mm Spigot length incl thread=47 mm Spigot thread length=14 mm Shank Diameter=8 mm Shank Diameter: 8 mm Overall Length Metric: 87

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slotters and also for accurate spacing....

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=53/64 inch D=21 mm C=19 mm OL=59 mm Shank Diameter=1/4 inch Shank length=40 mm Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=63/64 inch D=25 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch Shank length=40 mm Shank...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also...