|
|
Draper Tools |
| AIR HAMMER PANEL CUTTING CHISEL |
Product Code: 57804 For use with Draper Air Hammers and other manufacturers similar machines. Shank 10.18mm. All chisels must be used with a chisel retaining spring, Stock No.00092....
|
| AIR HAMMER SPOT WELD BREAKER CHISEL |
Product Code: 57801 For use with Stock Nos.57676 and 79564 as well as other manufacturers similar air hammers. Shank 10.18mm. All chisels must be used with a chisel retaining spring, Stock No.22315. Display packed....
|
| AIR UNDERBODY COATING GUN |
Product Code: 55109 Easy to use air underbody coating gun (Schutz). Fits 1 litre 'Schutz' type canisters. Display carton.Bore size: M42 x 3PTube length: 215mmOperating air pressure: 90 PSI (6.2bar)Average air consumption: 8.0 CFM (227 L/min)Minimum hose size: 3/8" I.DAi...
|
| BANDSAW BLADE 1712MM X 1/2"X14 |
Product Code: 76732 Our choice of bandsaw blades for hard and soft woods and plastics is made from high-performance steel to maximise the benefit of bandsaws in delivering faster and more accurate cuts, safely and efficiently....
|
| BRICK SCUTCH HAMMER |
Product Code: 11504 Solid forged single ended scutch hammer, made from fine grain high carbon steel correctly hardened and tempered fully painted with combed scutch fitted and machined face. Natural straight grained hickory shaft sanded and lacquered. Sold Loose.
...
|
| CARBON STEEL BORDER SPADE |
Product Code: 88792 Epoxy coated carbon steel, fully hardened and tempered with plastic coated steel cored shaft and plastic Y-dee handle. Sold loose.Colours of product may vary...
|
| CARBON STEEL GARDEN FORK |
Product Code: 88789 Epoxy coated carbon steel, fully hardened and tempered with plastic coated steel cored shaft and plastic Y-dee handle. Sold loose.Colours of product may vary...
|
| CARBON STEEL GARDEN SPADE |
Product Code: 88790 Epoxy coated carbon steel, fully hardened and tempered with plastic coated steel cored shaft and plastic Y-dee handle. Sold loose.Colours of product may vary...
|
| CIRCULAR PATIO SET COVER - 1900 x 800MM |
Product Code: 76232 Ideal for small square or circular tables and up to four chairs. Heavy duty polyethylene with steel plated eyelets. Polybag with header....
|
| DOUBLE ENDED SCUTCH HAMMER |
Product Code: 57539 Solid forged double ended scutch hammer from fine grain high carbon steel correctly hardened and tempered. Fitted with 1 plain and 1 combed scutch. Hardened tubular shaft fitted with shock absorbing vinyl grip. Sold Loose....
|
| DRAPER 1/2" 370W 230V Bench Morticer |
Product Code: 33651 For general workshop use. Fully adjustable fence and workpiece holder. Powerful induction motor provides a morticing capacity of 1/2". Supplied with depth stop, work clamp, 3 piece chisel set (1/4", 3/8", 1/2"), chisel reducing adaptors, chuck and ke...
|
| DRAPER 1/4" BSP Regulator Unit |
Product Code: 24329 Expert Quality, used to reduce compressed air pressure. Integral locking device, maximum inlet pressure 15bar/220psi. with gauge dual marked bar and psi. Display carton....
|
| DRAPER 100L 230V 2.2kW (3hp) V-Twin Air Compressor |
Product Code: 65396 Features: Suitable for workshop and site use, V-twin cylinder cast iron pump, Thermal motor protection overload, on/off pressure switch, pressure regulator and pressure gauge, Two quick euro coupling outlets, Wheels and transport handleTank Size ...
|
| DRAPER 100ML GRAVITY FEED HVLP AIR SPRAY GUN |
Product Code: 09708 General purpose HVLP spray gun with Aluminium body. Suitable for use with all paint types including water - based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Display carton.1 x Spray gun1 x Cl...
|
| DRAPER 100ml GRAVITY FEED HVLP COMPSITE BODY AIR SPRAY GUN |
Product Code: 09709 General purpose HVLP spray gun with lightweight composite body. Suitable for use with all paint types including water-based. Variable fan and fully adjustable flow. Spare nozzle, needle and cap sets are available - see table. Display carton.1 x Spray...
|
| DRAPER 100mm 1/4" Square Drive Satin Chrome Plated Extension Bar |
Product Code: 85133 Expert Quality, wobble end, manufactured from chrome vanadium steel hardened, tempered and satin chrome plated for corrosion protection. Hexagon ended and knurled for easy grip. Sold loose.
Manufactured and tested generally in accordance with DIN3...
|
|
|
Basket 0 items - £0.00
