|
|
Trend |
| TREND 4/21X1/2TC TWO FLUTE 16MM DIA X 37MM CUT |
Product Code: 4/21X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/25X1/2TC TWO FLUTE 17MM DIA X 25MM CUT |
Product Code: 4/25X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=43/64 inch
D=17 mm
C=25 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/25X1/4TC TWO FLUTE 17MM DIA X 25MM CUT |
Product Code: 4/25X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=43/64 inch
D=17 mm
C=25 mm
OL=54 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/29X1/4TC TWO FLUTE 18MM DIA X 25MM 257036 |
Product Code: 4/29X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/2X1/4TC TWO FLUTE 16MM DIA X 19MM 253339 |
Product Code: 4/2X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=16 mm
C=19 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Di...
|
| TREND 4/30X1/2TC TWO FLUTE 18MM DIA X 50MM 257052 |
Product Code: 4/30X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=50 mm
OL=92 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/40X1/2TC TWO FLUTE 18.2MM DIA X 32MM CUT |
Product Code: 4/40X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=23/32 inch
D=18.2 mm
C=32 mm
OL=74 mm
Shank Diameter=1/2 inch
Shan...
|
| TREND 4/4X1/4TC TWO FLUTE 18.2MM DIA X 21MM 257037 |
Product Code: 4/4X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=23/32 inch
D=18.2 mm
C=21 mm
OL=53 mm
Shank Diameter=1/4 inch
Shan...
|
| TREND 4/50X1/2TC TWO FLUTE 19MM DIA X 37MM CUT |
Product Code: 4/50X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/4 inch
D=19.1 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/52X1/2TC TWO FLUTE 19.1MM DIA X 63MM CUT |
Product Code: 4/52X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=19.1 mm
C=63 mm
OL=105 mm
Shank Diameter=1/2 inch
Shank Diameter: ...
|
| TREND 4/60X1/2TC TWO FLUTE 22MM DIA X 19MM CUT |
Product Code: 4/60X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=55/64 inch
D=22 mm
C=19 mm
OL=57 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/60X1/4TC TWO FLUTE 22MM DIA X 19MM CUT |
Product Code: 4/60X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=55/64 inch
D=22 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/62X1/2TC TWO FLUTE 21MM DIA X 19MM CUT |
Product Code: 4/62X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=53/64 inch
D=21 mm
C=19 mm
OL=59 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/62X1/4TC TWO FLUTE 21MM DIA X 19MM CUT |
Product Code: 4/62X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=53/64 inch
D=21 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/6X1/2TC TWO FLUTE 20MM DIA X 25MM 257054 |
Product Code: 4/6X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/32 inch
D=20 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/6X1/4TC TWO FLUTE 20MM DIA X 25MM 257038 |
Product Code: 4/6X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/32 inch
D=20 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/70X1/2TC TWO FLUTE 25 MM DIA X 25MM CUT |
Product Code: 4/70X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=63/64 inch
D=25 mm
C=25 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/71X1/4TC TWO FLUTE 23MM DIA X 19MM CUT |
Product Code: 4/71X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=29/32 inch
D=23 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/72X1/2TC TWO FLUTE 24MM DIA X 19MM CUT |
Product Code: 4/72X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=61/64 inch
D=24 mm
C=19 mm
OL=59 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/72X1/4TC TWO FLUTE 24MM DIA X 19MM CUT |
Product Code: 4/72X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=61/64 inch
D=24 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/7X1/2TC TWO FLUTE 22.2MM DIA X 31MM 257055 |
Product Code: 4/7X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/8 inch
D=22.2 mm
C=31 mm
OL=73 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/80X1/2TC TWO FLUTE 25.4MM DIA X 37MM CUT |
Product Code: 4/80X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 inch
D=25.4 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank Di...
|
| TREND 40/13X1/4TC B/GUIDED OVOLO 6.3MM RAD 3.2MM STEP |
Product Code: 40/13X1/4TC Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:
D=28.7 mm
C=13.0 mm
B=9.5 mm
B2=12.7 mm
B3=16.0 mm
R=1/4 inch
R=6.3 mm
OL=58 mm
Shank Diameter=1/4 ...
|
| TREND 40/14X1/2TC B'GUIDED OVOLO 9.5MM RAD 3.2MM STEP |
Product Code: 40/14X1/2TC Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.
The smaller bearing gives a 3.2mm quirk.
Dimensions:
D=35.0 mm
C=16.0 mm
B=9.5 mm
B2=12.7 mm
B3=16.0 mm
R=3/8 inch
R=9.5 mm
OL=63 mm
Shank Diameter=1/2 ...
|
| TREND 421/35X1/4TC HINGE SINKING 35MM DIA 253364 |
Product Code: 421/35X1/4TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards.
Dimensions:
D=35 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter...
|
| TREND 46/02X1/4TC ROTA-TIP A=90¡ X 19MM DIA X12MM CUT |
Product Code: 46/02X1/4TC Blades that can be rotated in 90 degree increments giving three extra new edges.
Dimensions:
D=19 mm
C=12 mm
B=19 mm
A=90 degrees
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 19
Cut Length Metric: 12
Overall Length Metri...
|
|
|
Basket 0 items - £0.00
