|
Trend |
TREND SNAP/SDA/2 SNAPPY SQUARE DRIVE 3/8X50MM |
Product Code: SNAP/SDA/2 Trend Snappy Square Drive Adapter - 3/8inch
The perfect accessory for use with socket sets when driving or removing nuts and bolts.
Allows any 3/8in AF socket to be used with a drill or impact driver.
Speeds up any applications where nuts and bolts a...
|
TREND SNAP/SDA/3 SNAPPY SQUARE DRIVE 1/2X50MM |
Product Code: SNAP/SDA/3 Trend Snappy Square Drive Adapter - 1/2inch
The perfect accessory for use with socket sets when driving or removing nuts and bolts.
Allows any 1/2in AF socket to be used with a drill or impact driver.
Speeds up any applications where nuts and bolt...
|
TREND SNAP/SQ/2A SNAPPY SQUARE NO 2 BIT 75MM OL |
Product Code: SNAP/SQ/2A No 2 Robertson square drive bits.
Dimensions:
Overall length=75 mm
Overall length=3 inch
D=1/8 inch
D=3.2mm
Shank Diameter=1/4 inch hex
Shank Diameter: 1/4 hex
Diameter Imperial: 1/8
Diameter Metric: 3.2
Overall Length Metric: 75...
|
TREND SNAP/SQ/3 SNAPPY SQUARE NO3 BIT PACK OF 3 |
Product Code: SNAP/SQ/3 Square Robertson screwdriver bits.
Dimensions:
OL=50 mm
D=9/64 nch
D=3.6mm
Shank Diameter=1/4 inch hex
Shank Diameter: 1/4 hex
Diameter Imperial: 9/64
Diameter Metric: 3.6
Overall Length Metric: 50...
|
TREND SNAP/TH/1 SNAPPY TOOL HOLDER - 30 PIECE |
Product Code: SNAP/TH/1 Heavy duty fabric tool holder.
With elastic pockets to hold Trend Snappy shanks.
Supplied with a Trend Snappy pencil.
Tool holders have a belt strap and are hook & loop fastening.
Tool contents not included.
Dimensions:
Holding capacity=30 pieces
...
|
TREND SNAP/TH2/SET SNAPPY TOOL HOLDER 60 PC BIT SET |
Product Code: SNAP/TH2/SET Trend Snappy Quick Change Tool Set - 60 Piece
Supplied with the Trend Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased productivity and performance.
Massive selection of accessories for drilling in wood, masonry and steel, ...
|
TREND SP-G SPARE PART PACK FOR NC2 SCREW |
Product Code: SP-G Spare part packs make ordering spares easier.
Packs include, hex key (if required), screw, washer and shield (if required).
Dimensions:
Screw=NC2 Domed Head Pozi
Washer ID=2.0 mm...
|
TREND T10ELK ROUTER 1/2 2000W VAR 115V & KITBOX |
Product Code: T10ELK Ideal for use by the tradesman in the workshop or on site.
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material.
Soft start eliminates sudden movement of machine on start up.
Two column preci...
|
TREND T421/35X1/4TC HINGE SINKING 35MM DIA |
Product Code: T421/35X1/4TC These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is bested suited for thinner laminate covered boards.
Use with pillar drills only.
Dimensions:
D=35 mm
OL=45 mm
Shank Diamete...
|
TREND T46/01X1/2TC GUIDED 90DEG TRIMMER 12.7X25.4MM C |
Product Code: T46/01X1/2TC Trend Professional 1/2in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work
12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templati...
|
TREND T46/02X1/4TC TRIMMING 9.5MM DIA X 25.4MM CUT |
Product Code: T46/02X1/4TC Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work
9.5mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating...
|
TREND T46/0X1/4TC TRIMMING 9.5MM DIA X 12.7MM 257115 |
Product Code: T46/0X1/4TC Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work
9.5mm diameter X 12.7mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templati...
|
TREND T46/1X1/4TC TRIMMING 16MM DIA X 13MM 257117 |
Product Code: T46/1X1/4TC For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.
Self-guiding trimmer with bearings mounted on end of cutter.
For trimming plastic or plywood overlay.
For copy profiling, use the bearing to follow ...
|
TREND T4ELK ROUTER 1/4 850W 115V VAR & KITBOX |
Product Code: T4ELK Lightweight, compact plunge router, with a removeable motor body. Ideally suited to overhead working and perfect for hinge recess cutting, timber profiling and hand carving.
Removeable Motor Body can be easily detached from the base for hand carving ...
|
TREND TEMP/LN57X1/4 TEMPLATE LN CUTTER/BUSH PACK 1/4 |
Product Code: TEMP/LN57X1/4 Trend Guide Bush and Cutter Set - for use with letter and number templates
Accessory set comprising CraftPro cutter C011X1/4TC & plastic 13mm guide bush.
Designed for use with the Trend Letter and Number Templates for making flat bottomed shallow let...
|
TREND TR12X1/4TC TWO FLUTE 12MM X 19MM EX LONG C/T |
Product Code: TR12X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
TREND TR44DX1/2TC TWO FLUTE 14MM DIA X 70MM CUT |
Product Code: TR44DX1/2TC Extra long two flute cutter for routing hollow honey-comb work top boards only.
Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into the router base.
TC tips are conv...
|
TREND VJS/CG/36 VARIJIG CLAMP GUIDE 36 INCH |
Product Code: VJS/CG/36 For accurate guiding of router, saws and jigsaws.
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
Ideal for holding and clamping work pieces.
Aluminium extrusion incorporating T-slots.
The clamps are fit...
|
TREND VJS/CG/50 VARIJIG CLAMP GUIDE 50 INCH |
Product Code: VJS/CG/50 For accurate guiding of router, saws and jigsaws.
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
Ideal for holding and clamping work pieces.
Aluminium extrusion incorporating T-slots.
The clamps are fit...
|
TREND WP-HJ/09 BRADAWL FOR HINGE/JIG |
Product Code: WP-HJ/09 Replacement bradawl only for the Hinge Jig.
Requires spacer.
Dimensions:
Restriction=Not to be sold to persons underage
Blade diameter=3 mm...
|
|
|