|
Trend |
TREND DWS/TF6/F TAPERED FILE 6 INCH FINE |
Product Code: DWS/TF6/F The most unique versatile half round/flat tapered file suitable for woodworking, gardening & domestic tooling.
Precision quality taper file.
Fine 600 grit (25 micron)
Guaranteed for five years when used with Trend Lapping Fluid.
Split plastic contour...
|
TREND FFS/120 FOLD FLUSH SAW 120MM |
Product Code: FFS/120 Flush cut pull saw for trimming plugs, pellets and dovetail joints. Thin, flexible, non-set teeth ensure blade doesnÕt mark the work piece when cutting.
Flexible Non-Set Teeth Blade ensures blade remains flat, protecting the work surface.
Carbon Ste...
|
TREND FT/160X48X20A SAW BLADE FINE TRIM 160MMX48TX20MM |
Product Code: FT/160X48X20A These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned.
The bore is accurately reamed to ensure precise balance.
Micro-granular carbide tips are used to give long lasting performance in a wide...
|
TREND FTS/CEG FTS CHISEL EDGE GUARDS 12 PACK |
Product Code: FTS/CEG Chisel edge guards to protect from injury and damage.
Sizes 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch.
Two of each size.
Pack of 12....
|
TREND FTS/S/F FTS FINISHING STONE 450G WHITE |
Product Code: FTS/S/F Replacement finishing stone for the Fasttrack sharpening system.
Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
Diamonds are held by Nickel p...
|
TREND FTS/S/FF FTS FINE FINISHING STONE 600G RED |
Product Code: FTS/S/FF Fine finish stone for the Fasttrack sharpening system.
Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
Diamonds are held by Nickel plating to ...
|
TREND FTS/S/R FTS ROUGHING STONE 90-120G SILVER |
Product Code: FTS/S/R Roughing stone for the Fasttrack sharpening system.
Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
Diamonds are held by Nickel plating to a s...
|
TREND GAUGE/D60 DIGITAL DEPTH GAUGE 60MM JAW |
Product Code: GAUGE/D60 Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring.
For hand routers, router tables and saw benches.
LCD readout for mm, imperial and fractions with auto shut off 5 mins.
Removable pin to allow hole depths to be...
|
TREND GB/5 SUB BASE C/W BUSH & 2 PINS |
Product Code: GB/5 Solid laminate. Accepts Trend Guide Bushes. Supplied with line-up pin and bush. Ensures concentricity of cutter and guide bush.
Suitable for :
Dewalt DW620, 621, 622, 624, DW625EK,629
Elu OF97(E) & MOF131, 177(E)
Bosch GOF 1600A, 1700ACE
Makita R...
|
TREND GB/T4/160 GUIDE BUSH 16MM FOR T4 HINGE JIG |
Product Code: GB/T4/160 Fits directly to Trend T4.
Allows for improved guide bush to cutter concentricity.
Dimensions:
Outside diameter=16 mm
Inner diameter=14.9 mm
Plate diameter=60 mm
Diameter Metric: 16
Diameter 2 Metric: 14.9
Cut Length Metric: 10...
|
TREND GB12 GUIDE BUSH 12MM DIA |
Product Code: GB12 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=12 ...
|
TREND GB14 GUIDE BUSH 14MM DIA |
Product Code: GB14 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=...
|
TREND GB18 GUIDE BUSH 18MM DIA |
Product Code: GB18 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=18 ...
|
TREND GB20 GUIDE BUSH 20MM DIA |
Product Code: GB20 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=...
|
TREND GB22 GUIDE BUSH 22MM DIA |
Product Code: GB22 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=22 ...
|
TREND GB24 GUIDE BUSH 24MM DIA |
Product Code: GB24 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=24 ...
|
TREND GB30/A GUIDE BUSH 30MM DIA X 10MM SPIGOT |
Product Code: GB30/A Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, T12, T14 and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside dia...
|
TREND GB774 GUIDE BUSH 7.74MM X 6MM DJ300/01 |
Product Code: GB774 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=7.7...
|
TREND GB95 GUIDE BUSH 9.5MM ODX 7.9MM ID X6MM |
Product Code: GB95 Guide bush guides the router when using a template.
Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
Dimensions:
Outside diameter=9.5...
|
TREND HM/SHEAR HAND MITRE SHEAR |
Product Code: HM/SHEAR With 45 degree angled wings.
For perfect mitre cuts of seals, mouldings, beadings and weatherseals.
Can be used to cut mouldings at 90 degrees up to 10mm thick.
For battens at 45 degrees the maximum thickness is 15mm and 35mm wide.
Left and right h...
|
|
|