|
Trend |
TREND CSB/CC25542 CRAFT BLADE CC 255MM X 42T X 30MM |
Product Code: CSB/CC25542 Trend Craft Pro saw blade - 255mm diameter 30mm bore 42tooth TCT
Specialist blade with -5 degree hook, 2.4mm kerf with 1.8mm plate thickness for clean, safe cutting with mitre saws.
Ideally suited for general purpose crosscutting and mitreing with m...
|
TREND CSB/CC25572 CRAFT BLADE CC 255MM X 72T X 30MM |
Product Code: CSB/CC25572 Trend Craft Pro saw blade - 255mm diameter 30mm bore 72tooth TCT
Specialist blade with -5 degree hook, 2.4mm kerf with 1.8mm plate thickness for clean, safe cutting with mitre saws.
Perfect for fine cutting and mitre work on architraves, skirtings a...
|
TREND CSB/CC26072 CRAFT BLADE CC 260MM X 72T X 30MM |
Product Code: CSB/CC26072 Trend Craft Pro saw blade - 260mm diameter 30mm bore 72tooth TCT
Specialist blade with -5 degree hook, 2.6mm kerf with 2mm plate thickness for clean, safe clean cutting with mitre saws.
Perfect for fine cutting and mitre work on architraves, skirting...
|
TREND CSB/CC30548 CRAFT BLADE CC 305MM X 48T X 30MM |
Product Code: CSB/CC30548 Trend Craft Pro saw blade - 305mm diameter 30mm bore 48tooth TCT
Specialist blade with -5 degree hook, 3mm kerf with 2mm plate thickness for clean, safe clean cutting with mitre saws and table saws.
Ideally suited for general purpose crosscutting an...
|
TREND CTI/80/PK2 CABLE TIDY INSERT 80 BROWN 3 OFF |
Product Code: CTI/80/PK2 Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverplate. Cover plates can be removed to all...
|
TREND D/CLAMP/A DOOR CLAMP RATCHET TYPE |
Product Code: D/CLAMP/A Holds door while drilling and fitting locks.
No set-up time needed.
No more searching and alternative door stops.
Padded to prevent door and floor damage.
For doors up to 55mm thick.
Dimensions:
Maximum door thickness=55 mm
Maximum foot reach=90 mm
...
|
TREND D/LIFT/A DOOR LIFT FOOT OPERATED |
Product Code: D/LIFT/A Foot operated lifter to support door while fitting into door frame.
Foot operated freeing up the users hands.
Slides under door and stays flat and stable until ready to activate the lift with users foot.
Lifts door 38mm high and maximum weight 108 kg...
|
TREND DS/TAPE/A DOUBLE SIDED TAPE THICK 25MMX25M |
Product Code: DS/TAPE/A Heavy duty double-sided sticky tape.
Ideal where temporary fixing is required for example when jig making. Can be removed with your thumb.
Rayon cloth coated with rubber resin adhesive for a strong hold.
Siliconised paper release liner.
Cut with a kn...
|
TREND DWL/3/50 DOWELS 8 X 40MM 50 OFF |
Product Code: DWL/3/50 Multi-grooved kiln dried hardwood dowel pins.
Suitable for joining chipboard and MDF panels in the production of cabinet carcasses and doors.
The grooves in the dowels allow for gluing up.
Dimensions:
D=8 mm
Overall length=40 mm
Timber=Beech
Di...
|
TREND DWL/5/50 DOWELS 10 X 50MM 50 OFF |
Product Code: DWL/5/50 Multi-grooved kiln dried hardwood dowel pins.
Suitable for joining chipboard and MDF panels in the production of cabinet carcasses and doors.
The grooves in the dowels allow for gluing up.
Dimensions:
D=10 mm
Overall length=50 mm
Timber=Beech
D...
|
TREND DWL/C/PK1 DOWEL CENTRE POINT 6/8/10MMX2 (6PK) |
Product Code: DWL/C/PK1 Six pack of metal dowel centre points of diameter 6mm, 8mm & 10mm.
Pair of 6mm, 8mm and 10mm diameter.
Dowel centres fit into blind holes to allow lining up for the mating hole.
Place end of dowel centre in the bored dowel hole in one piece of wood, ...
|
TREND DWS/HG/SET DIAMOND HONING GUIDE SET |
Product Code: DWS/HG/SET Ensure correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone.
Precision roller with alloy body which self-centre clamps bevel edge chisels from 3/8 inch (10mm) to 1-1/4 (32mm) and plane irons up to 2-3/8...
|
TREND DWS/HP/100 HONING PASTE 100GM |
Product Code: DWS/HP/100 100 gm honing/polishing compound bar.
Used with a leather strop to polish sharpened cutting edges to give a highly polished, sharp cutting edge.
Dimensions:
Bar weight=100 g
Bar size=100 x 35 x 18 mm
SDS=Please see downloads...
|
TREND DWS/TF3M/F TAPERED FILE MINI 3 INCH FINE |
Product Code: DWS/TF3M/F A versatile 3 inch half round/flat mini tapered file suitable for woodworking, gardening & domestic tooling.
Precision quality taper file.
Fine 600 grit (25 micron)
Guaranteed for five years when used with Trend Lapping Fluid.
Split plastic contoured...
|
TREND DWS/TF6/F TAPERED FILE 6 INCH FINE |
Product Code: DWS/TF6/F The most unique versatile half round/flat tapered file suitable for woodworking, gardening & domestic tooling.
Precision quality taper file.
Fine 600 grit (25 micron)
Guaranteed for five years when used with Trend Lapping Fluid.
Split plastic contour...
|
|
|