|
|
Trend |
| TREND 6200/10TC ADJ COUNTERSINK 5/8 DIA |
Product Code: 6200/10TC They are designed to drill and coutersink simultaneously, a wide variety of materials.
Supplied with a HSS slow spiral drill bit.
Fully adjustable, a hex key is supplied.
The TCT version is used for plywood, particle boards and plastics (abrasi...
|
| TREND 6200/4HSS ADJ COUNTERSINK 1/2 DIA |
Product Code: 6200/4HSS They are designed to drill and coutersink simultaneously, a wide variety of materials.
Supplied with a HSS slow spiral drill bit.
Fully adjustable, a hex key is supplied.
Use at drilling speeds only.
Not suitable for ferrous or non ferrous me...
|
| TREND 6200/6HSS ADJ COUNTERSINK 1/2 DIA |
Product Code: 6200/6HSS They are designed to drill and coutersink simultaneously, a wide variety of materials.
Supplied with a HSS slow spiral drill bit.
Fully adjustable, a hex key is supplied.
Use at drilling speeds only.
Not suitable for ferrous or non ferrous me...
|
| TREND 6200/6TC ADJ COUNTERSINK 1/2 DIA |
Product Code: 6200/6TC They are designed to drill and coutersink simultaneously, a wide variety of materials.
Supplied with a HSS slow spiral drill bit.
Fully adjustable, a hex key is supplied.
The TCT version is used for plywood, particle boards and plastics (abrasi...
|
| TREND 6200/8HSS ADJ COUNTERSINK 5/8 DIA |
Product Code: 6200/8HSS They are designed to drill and coutersink simultaneously, a wide variety of materials.
Supplied with a HSS slow spiral drill bit.
Fully adjustable, a hex key is supplied.
Use at drilling speeds only.
Not suitable for ferrous or non ferrous me...
|
| TREND 7/50X1/4TC SASH BAR OVOLO JOINT 10MM RAD |
Product Code: 7/50X1/4TC Designed for sash bar window construction.
Dimensions:
D=22 mm
C=18 mm
R=10 mm
OL=46.6 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 22
Cut Length Metric: 18
Overall Length Metric: 46.6...
|
| TREND 7/5X1/4TC OVOLO/ROUNDING OVER 10MM RAD 257071 |
Product Code: 7/5X1/4TC Some Ovolo cutters can be used with radius cutters, to make rule joints.
Dimensions:
D=31 mm
C=16 mm
R=10 mm
OL=44.6 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 31
Cut Length Metric: 16
Overall Length Metric: 44.6...
|
| TREND 7D/3X1/4TC PIN GUIDED OVOLO 9.5MM RAD 253342 |
Product Code: 7D/3X1/4TC Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Dimensions:
D=29 mm
C=16.5 mm
R=3/8 inch
R=9.5 mm
P=5.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 29
Cut Length Me...
|
| TREND 7E/5X1/4TC PIN GUIDED R/OVER 12.7MM RAD 253345 |
Product Code: 7E/5X1/4TC Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
Dimensions:
D=34.4 mm
C=19 mm
P=9 mm
R=1/2 inch
R=12.7 mm
OL=56.1 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 34.4
Cut Length Metric...
|
| TREND 84/09X1/4TC DECOR SUNK BEAD 3MM RAD |
Product Code: 84/09X1/4TC Gives a narrow appearance to a board edge.
Dimensions:
D=22 mm
C=10 mm
R=3 mm
OL=39 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 22
Cut Length Metric: 10
Overall Length Metric: 39...
|
| TREND 9/10X1/4TC STAFF BEAD/NOSING 3MM RAD |
Product Code: 9/10X1/4TC Ideal for producing nosings and attractive edge moulds.
Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging.
Dimensions:
D=19 mm
C=6 mm
C2=22 mm
R=3 mm
OL=54 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 19
C...
|
| TREND 9/5X1/2TC STAFF BEAD/NOSING 12.7MM RAD |
Product Code: 9/5X1/2TC Ideal for producing nosings and attractive edge moulds.
Dimensions:
D=42.9 mm
C=25.4 mm
C2=40 mm
R=12.7 mm
OL=78 mm
Shank Diameter=1/2 inch
For stationary machines at max. recommended speed 18,000 RPM
Shank Diameter: 1/2
Diameter Metric: 42.9
Cut...
|
| TREND 9/70X1/4TC B/GUIDED CORNER BEAD 2MM RAD |
Product Code: 9/70X1/4TC Creates a corner bead with a step.
By making a second pass at 90 degrees a full corner bead can be cut.
Two flutes give a clean finish to cut edges.
Dimensions:
D=23 mm
D2=20 mm
B=16 mm
R=2 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4...
|
| TREND 9/71X1/4TC B/GUIDED CORNER BEAD 3.2MM R 257129 |
Product Code: 9/71X1/4TC Creates a corner bead with a step.
By making a second pass at 90 degrees a full corner bead can be cut.
Two flutes give a clean finish to cut edges.
Dimensions:
D=22 mm
D2=18.9 mm
B=12.7 mm
R=3.2 mm
OL=54 mm
Shank Diameter=1/4 inch
Shank Diameter:...
|
| TREND 9/72X1/4TC B/GUIDED CORNER BEAD 4.8MM R 257130 |
Product Code: 9/72X1/4TC Creates a corner bead with a step.
By making a second pass at 90 degrees a full corner bead can be cut.
Two flutes give a clean finish to cut edges.
Dimensions:
D=28 mm
D2=25.7 mm
B=16 mm
R=4.8 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1...
|
| TREND 9/73X1/4TC B/GUIDED CORNER BEAD 7MM RAD |
Product Code: 9/73X1/4TC Creates a corner bead with a step.
By making a second pass at 90 degrees a full corner bead can be cut.
Two flutes give a clean finish to cut edges.
Dimensions:
D=31.9 mm
D2=28.6 mm
B=16 mm
R=7 mm
OL=58 mm
Shank Diameter=1/4 inch
Shank Diameter: 1...
|
| TREND AIR/P/1 THP2 FILTER PACK (PAIR) |
Product Code: AIR/P/1 TH2P-S filter pack for the AIRSHIELD PRO.
Respiratory protection to BS EN12941:1999 to cover all dusts generated when working in hard and softwoods, ply, MDF and other timber-based materials.
Simple to swap over, the filters ensure you are always gua...
|
| TREND B127 BEARING 1/2 DIA X 1/4 BORE |
Product Code: B127 Trend Router Cutter Bearing - for 1/4in shank mounting
High quality ball bearing for free running against an edge to prevent heat build up.
1/4in inside diameter for direct fit to router shanks and arbors.
1/2in outside diameter for matched fit to tr...
|
| TREND B127A BEARING 1/2 DIA X 3/16 BORE |
Product Code: B127A Trend Router Cutter Bearing - for 3/16in bottom mounting
High quality ball bearing for free running against an edge to prevent heat build up.
3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
1/2in outside diameter for m...
|
| TREND B16 BEARING 5/8 DIA X 1/4 BORE |
Product Code: B16 Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B18 BEARING 18MM DIA X 1/4 BORE |
Product Code: B18 Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B19H BEARING 19.0MM DIA X 6MM ID |
Product Code: B19H Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B20 BEARING 20MM DIA X 1/4 BORE |
Product Code: B20 Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B22 BEARING 22MM DIA X 1/4 BORE |
Product Code: B22 Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
| TREND B22A BEARING 22MM DIA X 3/16 BORE |
Product Code: B22A Bearings are shielded to prevent penetration of dust and grease packed for life.
They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always che...
|
|
|
Basket 0 items - £0.00
