Trend

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Dimensions: D=34.9 mm C=20 mm B=9.5 mm B2=12.7 mm R=6.3 mm OL=58 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 34.9 Cut Length Metric: 20 O...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=22.2 mm C=14.3 mm B=9.5 mm B2=12.7 mm R=1/4 inch R=6.3 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 7/8 Diameter Metri...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

...

Ideal for newel posts and caps for stairs. Supplied with one bearing. Dimensions: D=35.1 mm C=12 mm C2=16 mm B=12.7 mm A=45 degrees OL=67 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 35.1 Cut Length Metric: 12 Overall Length...

Ideal for newel posts and caps for stairs. Supplied with one bearing. Dimensions: D=35.1 mm C=12 mm C2=16 mm B=12.7 mm A=45 degrees OL=57 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 35.1 Cut Length Metric: 12 Overall Length...

Bearing guided for straight or curved work. For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted. A variety of alloy bearing rings are available to give various rebate sizes. Rings are secured between the two bearin...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. When using bearing Ref. B95A, make two passes when a full depth of ...

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Dimensions: D=20 mm C=14 mm A=80 degrees OL=57 mm Shank Diameter=1/4 inch Shank Diameter: 1...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument productio...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 9.5mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and woo...

Trend Professional 1/4in shank bearing guided trimming cutter - 15.9mm diameter for laminate and template work 15.9mm diameter X 19.1mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Trend Professional 1/2in shank bearing guided trimming cutter - 19.1mm diameter for laminate and template work 19.1mm diameter X 25.4mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25.4mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 32mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wood...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Dimensions: D=1/2 inch D=12.7 mm C=19 mm OL=51 mm Sh...

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. ...

Trend Professional HSSE 8mm shank straight router cutter - 5mm diameter for aluminium and plastics 5mm diameter X 16mm cut length for specialist routing of UPVC, aluminium and anodised aluminium on CNC machines. Narrow extended neck profile allows th...

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute helical for drilling and slotting, cutting aluminium an...

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 3 degree shear. ...

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance hole only. Dimensions: D=12 mm D2=5.5 mm C=20 mm...

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous or non ferrous met...

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasi...