Macpherson 10 Litre Magnolia Contractors Matt Emulsion *Obliterating*

. CONTRACT MATT

High obliterating matt emulsion for use on new plaster allowing surfaces to dry quickly. A great combination of quality and value for money.

AVAILABILITY Colour range Brilliant White & Magnolia. Packaging 10 litres.

PROPERTIES Drying time Under normal drying conditions touch dry 1-2 hours, recoatable after 4 hours. Allow for adequate ventilation during the drying period. Finish Matt. Composition Pigment: Titanium Dioxide, coloured pigments and extenders. Binder: Vinyl acetate copolymer. Solvent: Water. Spreading rate Up to 13m² per litre depending on surface texture and porosity. Wet film thickness 77 micrometres at 13m² per litre. Dry film thickness 18 micrometres at 13m² per litre. Volume solids 24% White other colours will vary. Flash point Not applicable. VOC content EU limit value for this product (cat.A/a): 30 g/l (2010) This product contains max. 2 g/l VOC Limitations For interior use only. Not suitable for areas subjected to heavy condensation. Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

PREPARATION New surfaces All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery, polished plaster or dense surfaces should be primed with Macpherson Universal Primer. Porous surfaces should be ‘mist’ coated with Macpherson Contract Matt thinned with up to 40% clean water. COATING SYSTEM Apply two coats as required

APPLICATION Stir well before use. Apply by brush or roller. For airless spray dilution may be required. For further information contact the Customer Relations Team.

CLEANING Return surplus material to container. W