Measuring & Site Equipment

Easy to use torque wrench. The click-type operation and micrometer adjustment allow the user to apply the correct torque when required. The torque value range is 30 - 210Nm. Clockwise right-hand thread torque application only. Supplied in a blow mould case.

Marked with both metric and imperial graduations. Able to measure in three ways: internal, external and depth. Display packed.

Manufactured from tough, impact resistant ABS plastic with clear graduations of cm/mm one side and 1/16"/inches on the other.

For use with chalk powder. Multiples of 12 only, Supplied in countertop display.

100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Display packed.10 x Imperial blades: 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015, 0.025"

100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Display packed.10 x Metric blades: 0.05, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80mm

Fibreglass tape, graduated from metres into cm/mm and inches into 1/8" on reverse. ABS plastic case with grab handle, winding handle and stainless steel eyelet on end of tape. Display packed.Manufactured to EC Class III accuracy

Bluerange 200mm/8 Digital Vernier Caliper

Shears with non-stick hardened and tempered straight edge blades. Manufactured with triangular steel handles with soft grips and shock bumpers for user comfort. Display packed.

Easy to use torque wrench. The click-type operation and micrometer adjustment allow the user to apply the correct torque when required. The torque value range is 5 - 25Nm. Clockwise right-hand thread torque application only. Supplied in a blow mould case.

100mm long taper blades, hardened and polished for long accurate life. Each blade is marked with its size and folds into a polished steel case with thumbscrew. Display packed.20 x Metric blades: 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60,...

Fully flexible head with mirror 55mm diameter to give good visibility in concealed areas. Plated finish with plastic grip. Display packed.

High performance, suitable for applications where a high volume of air or fast pumping action is required. Pressure dial is marked 0-100 psi and 0-7 bar. Robust all-metal design with 4mm thick steel base. Supplied with 600mm (approx.) delivery hose with "Lock On" connector...

Gives fast and easy-to-read measurement of tyre tread depth from 1-26mm in one millimetre graduations on sliding barrel. Includes a 1.6mm graduation to comply with MOT minimum tyre tread depth requirement. Accepted in the UK by the Department of Transport for MOT Testing. Plated...

High impact plastic with stainless steel blade and two hang holes. Ideal for cutting straight edges, smoothing wall coverings or as a paint guard.

Fine ground with adjustment by knurled wheel. Display packed.

Matt black metal stock with polished faces, brass adjusting screw, spirit level and scriber. Aluminium blade graduated (on both sides of the blade) metric on one edge and imperial on the other. Display packed.

Matt black metal stock with power coated edges, centre reversible protractor and brass adjusting screws. Protractor incorporates a spirit level and is clearly graduated 0¡ - 180¡ in both directions. Stock incorporates spirit level and scriber. Aluminium blade is graduated mm and 1/16" one...

Fine ground with adjustment by knurled wheel. Display packed.

General purpose calipers with thumb wheel fine adjustment. Can be used for internal, external and depth measurements. Graduations shown in metric (cm/mm) and imperial inch marks. Display packed.